Shielding
Transport of external spectra through a spherical aluminum shell by precomputed Geant4 response matrices.
Definition
A wall stops low-energy particles and slows the remainder. Nuclear interactions of energetic protons and nuclei produce secondaries (neutrons, gamma rays, pions, lighter fragments), and stopping electrons emit bremsstrahlung. Shielding is effective against the soft spectra of solar particle events; for galactic cosmic rays the first few g/cm² change the dose little, and secondary neutrons from thick walls can increase it. Thickness is expressed as areal density in g/cm²; 1 g/cm² of aluminum corresponds to 3.7 mm.
Model
- Method
- Geant4 11.4.1 with the QBBC physics list: a spherical aluminum shell under isotropic irradiation, 0.3 to 30 g/cm².
- Checked against
- The MSL/RAD cruise dose, and SHIELDOSE-2 for protons.
- Expect
- See the validation results.
Geant4 Agostinelli et al. (2003) Allison et al. (2006) Allison et al. (2016) was run once to produce response matrices; folding a spectrum through a matrix takes a few milliseconds in a browser.
- Geometry. A vacuum sphere of 50 cm radius inside an aluminum shell of 0.3, 1, 3, 10, 30, 60 or 100 g/cm².
- Source. Primaries start on the outer surface with the angular distribution of an isotropic external field.
- Scoring. Track length of every particle crossing the interior, by species and energy, giving the internal fluence per unit external fluence.
- Incident species. Protons, helium, carbon, oxygen, neon, magnesium, silicon, iron, electrons, photons and neutrons, five energy bins per decade.
- Physics. QBBC physics list, 0.1 mm production cut. A transparent shell reproduces the identity to 1 to 3 %.
Each external species is folded through its matrix. Nuclei without a dedicated matrix use the nearest heavier simulated nucleus, with fragment charges shifted accordingly.
The internal value is the average over the interior volume. Off-center points see the wall at oblique incidence, so for thin walls and soft spectra the interior average is 0.6 to 0.8 of the central value; for penetrating radiation it is close to 1.
Habitats
A point inside a real spacecraft sees a different depth of material in each direction. For an isotropic field the dose there is the solid-angle mean of the shell dose over the distribution of depths, D = ∫ D_shell(t) dF(t), where F(t) is the fraction of directions shielded by less than t (the sector method).
For a typical point inside the pressurized elements of the International Space Station, models of the as-built structure give a median depth of 50 to 60 g/cm², with 10 % and 90 % points at 10 and 100 g/cm² Koontz et al. (2005). The model takes the median at 55 g/cm², interpolates F linearly in log t between these points, and closes the distribution at 3 g/cm² (pressure shell and debris shield alone) and 200 g/cm². The two end points are assumptions. Depths beyond 100 g/cm², the thickest simulated shell, take its response; moving the upper end point between 150 and 300 g/cm² changes the Station dose by less than 1 %, while the lower end point matters more (see dose). The dose panel offers this distribution as the wall "ISS interior, as built".
Assumptions and limitations
- The external field, including sunlight, is treated as isotropic, and each thickness as a uniform sphere. The sector method neglects scattering between directions; run Geant4 on the actual geometry with the Python engine where that matters.
- Only aluminum is precomputed; the Python engine can generate matrices for other materials.
- Hadronic yields carry 10 to 30 % model uncertainty, more for light fragments.
- Fragment channels with fewer than three simulated events are discarded as noise.
- The browser uses packed matrices (output bins merged to five per decade, values quantized to 0.06 dex), agreeing with the Python fold within 6 %.
- Protons below 1 MeV, electrons below 10 keV and photons below 1 keV are treated as stopped.
Cross-check
At the heliocentric distance of Mars, quiet conditions, φ = 480 MV, behind 10 g/cm² of aluminum:
| Method | Dose in water |
|---|---|
| Matrix fold: charged point dose plus neutral dose in a sphere | 0.47 mGy/day |
| Direct Geant4 run, mean over a water sphere of 10 cm radius | 0.38 ± 0.02 mGy/day |
| Direct Geant4 run, sphere of 2 cm radius (low statistics) | 0.58 ± 0.22 mGy/day |
The body-sized sphere self-shields its interior, so its mean dose lies below the point dose.
Sources
| Used for | Source | Basis |
|---|---|---|
| Transport: Geant4 11.4.1, QBBC reference physics list, 0.1 mm production cut | Agostinelli et al. (2003); Allison et al. (2006); Allison et al. (2016) | code |
| Python bindings | geant4_pybind 0.1.3 geant4_pybind 0.1.3 | code |
| Data sets: EMLOW 8.8, PARTICLEXS 4.2, PhotonEvaporation 6.1.3, RadioactiveDecay 6.1.4, ENSDFSTATE 3.0, SAIDDATA 2.0, ABLA 3.3, INCL 1.3 | Geant4 11.4 data sets Geant4 collaboration (via conda-forge packages) | data |
| Ion stopping: proton S (Geant4) × Barkas effective charge Z[1 − exp(−125βZ^−2/3)]² | Barkas (1963) | standard |
| Electron collision stopping power, density-effect parameters | ICRU Report 37 (1984); Sternheimer et al. (1984) | standard |
| Quality factor Q(L) | ICRP Publication 60 (1991) | standard |
| ISS interior shielding: distribution of aluminum-equivalent depth (10% below about 10 g/cm², median about 55, 90% below about 100), folded over the shell responses at 0.3 to 100 g/cm² | Koontz et al. (2005) End points (3 and 200 g/cm²) are our assumption; depths beyond 100 g/cm² use the 100 g/cm² response | primary |
| Validation: GCR dose in transit to Mars (Si 0.332 ± 0.023, plastic 0.461 ± 0.092 mGy/day; 1.84 ± 0.33 mSv/day) | Zeitlin et al. (2013); Guo et al. (2015) | primary measurement |
| Validation: absorbed dose in the Columbus module of the ISS, 195 to 360 µGy/day across 11 locations, and a mean quality factor of 3.3 ± 0.1 | Berger et al. (2016) DOSIS passive dosimeters | primary measurement |