Plasma
Solar wind and geostationary hot plasma, at eV to keV energies.
Definition
- Solar wind: the outflow of the solar corona at 300 to 800 km/s, consisting of protons, a few percent helium and electrons at about 1 keV per nucleon. It convects the solar magnetic field outward and modulates galactic cosmic rays.
- Geostationary plasma: hot magnetospheric plasma; during substorms electron temperatures reach tens of keV and charge spacecraft surfaces to kilovolts.
These populations do not penetrate shielding and do not contribute to internal dose; they are relevant to surface charging, sputtering and unshielded sensors.
Model
- Method
- ECSS mean solar wind, falling as r⁻²; the ECSS worst-case bi-Maxwellian at geostationary orbit.
- Checked against
- Nothing independent yet.
- Expect
- Typical values for the wind; a design worst case at geostationary orbit.
- Solar wind. Mean 1 AU values from ECSS ECSS-E-ST-10-04C: speed 468 km/s, proton density 8.7 cm⁻³, proton temperature 1.2×10⁵ K, electron temperature 1.0×10⁵ K, helium fraction 4.7 % by number; density scales as r⁻² and electron temperature as r⁻⁰·⁶⁴. The helium temperature is 1.94 times the proton temperature Wilson et al. (2018). Each species is a drifting Maxwellian, present only outside the magnetopause.
- Geostationary plasma. ECSS worst-case bi-Maxwellian: electrons at 0.2 cm⁻³ and 0.4 keV plus 1.2 cm⁻³ and 27.5 keV; protons at 0.6 cm⁻³ and 0.2 keV plus 1.3 cm⁻³ and 28 keV. Applied between L = 5 and 10 when selected.
Assumptions and limitations
- The solar wind is represented by mean values; fast and slow streams and density enhancements of several times the mean are not modeled.
- The geostationary case is a surface-charging design worst case, not typical conditions.
- No other magnetospheric plasma is modeled: no plasmasphere, ring current or ionosphere.
- A later erratum to Wilson et al. has not been checked against the helium temperature ratio.
Sources
| Used for | Source | Basis |
|---|---|---|
| Solar wind means at 1 AU, r⁻² density, Te ∝ r⁻⁰·⁶⁴ | ECSS-E-ST-10-04C Table 8-2 and §8.1.5 | standard |
| α/p temperature ratio (median 1.94) | Wilson et al. (2018) | primary |
| GEO worst-case bi-Maxwellian | ECSS-E-ST-10-04C Table 8-1 | standard |